Large Dock Mount

Dock Mount attaches to your dock or pole and directs the flow of water from
the Ice Eater in any direction.

Specifically Fits: .75-hp & 1-hp models

Parts Included in Dock Mount Box:

• (1) Shroud Assembly
  
• (1) Bale
  
• (1) 3/8" x 2" Clevis Pin & Clip
  
• (2) 1/2" x 1" Clevis Pin & Clip
  
• (4) 1-1/4" Flat Washer
  
• (1) Tightening Handle
  
• (1) Base
  
• (3) 1/2" x 1-1/4" Bolt
  
• (3) 1/2" Lockwasher
  
• (3) 1/2" Nut
  
• (1) Pipe Holder

What You Need to Provide:

• 1-5/16" galvanized or stainless steel pipe (max. length 6')
  
• U-bolts or Lag Screws (for securing dock mount)

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 75000
UPC : 652443002129

1/2HP Ice Eater with 25' Cord - 115V

Features:

• 1/2HP energy efficient high quality motor with 28 pounds thrust
  
• 5.0 Amps, 115V, 1 phase, 60/50 cycle
  
• 25' quick change power cord
  
• 2 - 25' x 3/8 hollow braided mooring lines with shackles
  
• Dimensions of shipping box 12-5/8 x 12-5/8 x 12-3/4
  
• Weight 36 lbs
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  
• Motor shaft is 316 stainless steel, the best material for salt water application
  
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
  
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
  
• Stator motor windings have double impregnation of baked insulating varnish
  
• 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  
• Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  
• 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  
• Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
  
• Performance certified tested at our facility for proper output and leaks before shipment
  
• Best 3-Year limited warranty in the marketplace
  
• Comes complete, just open the box, remove and install
  
• Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P500-25-115V
UPC : 652443000040

Ice Eater P250

HP: 1/4
Volts/Amps* 115V / 2.5A
Open Diameter*: 20-25 ft.
Cord Length: 25 ft.

All units available in 230V, (half the amps, i.e., 2.5 @ 115V = 1.25 @ 230V).
* 200 Ft. available in 230V only
* Based on an average winter - extreme conditions will cause open diameter to become smaller.

When water freezes, it expands, becoming lighter. This fact is the principle upon which Ice Eater functions. Ice Eater circulates warmer bottom water to the top, thereby preventing ice formation. If surface ice already exists, the flow of warmer bottom water will effectively melt it. Ice Eater obtains its superior operating efficiency through the use of an axial flow, shrouded propeller design. This design also provides protection for the rotating propeller.
Manufacturer : Ice Eater by Power House
Manufacturer Part No : P250-25-115V
UPC : 652443001276

120V Thermostat for Salt or Fresh Water with Adjustable Temperature Settings (0° to 80°)

Ice Eater by The Power House KT16110 heavy duty 120Volt adjustable thermostat for fresh and saltwater applications. Temperature range is 0 to 80°.

Ice Eater's weatherproof line voltage 2 stage thermostat is great for direct control of heaters , fans , air conditioners , ventilation equipment and more. Great for both heating and cooling.

Not effected by surges and lightning strikes or power outages like a digital thermostat.

Capillary controlled component gives accurate +/- 2 degrees accuracy.

A graduated temperature control unit that can be used anywhere . Clear cover protects from weather and damage. Weatherproof and corrosion proof with all polycarbonate thermoplastic construction and stainless steel capillary sensor.

Thermostats are ambient air temps.

*UL listed MADE IN USA
Manufacturer : Ice Eater by Power House
Manufacturer Part No : KT16110
UPC : 652443002136

Ice Eater P1000

Ice Eater P1000 - 1 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Ice Eater P1000 Features:

• Standard 100' quick change power cord.
  
• Two 25 ft. x 3/8 in. hollow braided lines with shackles
  
• Environmentally friendly lubricant
  
• Patented Venturi Design for maximum thrust
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.

Specifications:

• Horsepower: 1 HP
  
• Power needed: 115V, 7.0amps, 1-phase, 50Hz
  
• Typical Thrust: 42 lbs. thrust
  
• De-Ices Diameter of: Approx. 80 ft.
  
• Uses: De-icing large boats, marinas, or to replace several smaller units

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P1000-100-115V
UPC : 652443000187

1HP Ice Eater with 25'Cord - 115V

Features:

• 1HP energy efficient high quality motor
  
• 115V, 7.0 Amps, 1 phase, 60/50 cycle
  
• 25' quick change power cord
  
• 2 - 25' x 3/8 hollow braided mooring lines with shackles
  
• Dimensions of shipping box, 14-1/2 x 14-1/2 x 16-1/8
  
• Shipping weight 45 lbs
  
• For large boats, marinas and heavier uses
  
• Can be used in place of several smaller units
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
  
• Motor shaft is 316 stainless steel, the best material for salt water application
  
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
  
• Stator motor windings have double impregnation of baked insulating varnish
  
• 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  
• Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
  
• 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  
• Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  
• Performance certified tested at our facility for proper output and leaks before shipment
  
• Best three year limited warranty in the marketplace
  
• Comes complete, just open the box, remove and install
  
• Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P1000-25-115V
UPC : 652443000163

Ice Eater P1000 - 1 HP

Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Features:

1 HP energy-efficient high quality motor with 42lbs thrust

115V, 7.0 amps, 1-phase, 50/60 Hz

Environmentally friendly lubricant

Patented Venturi Design for maximum thrust

Weight: 44lbs

Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.

Specifications:

• Horsepower: 1 HP
  
• Power needed: 115V, 7.0 amps, 1-phase, 50/60 Hz
  
• Typical Thrust: 42lbs thrust
  
• De-Ices Diameter of: Approx. 80'
  
• Uses: De-icing mid-sized boats and docks

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P1000-50-115V
UPC : 652443000170

220V Thermostat with Adjustable Temperature Range

Ice Eater by The Power House 220V Thermostat with adjustable Temperature Range from 30°F to 110°F.

Specifically for use in both salt water and fresh water.

The thermostats are ambient air temps.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : KP16220
UPC : 652443002051

3/4HP Ice Eater with 100' Cord - 115V

Features:

• 3/4HP energy efficient high quality motor with 36 lbs thrust
  
• 4.7 Amps, 115V, 1 phase, 60/50 cycle
  
• 100' power cord
  
• 2 - 25' x 3/8 hollow braided mooring lines with shackles
  
• Dimensions of shipping box 14-1/2 x 14-1/2 x 16-1/8
  
• Weight 45 lbs
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
  
• Motor shaft is 316 stainless steel, the best material for salt water application
  
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  
• Stator motor windings have double impregnation of baked insulating varnish
  
• 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  
• Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  
• 100' of 16/3 water and oil resistant cord with 3 prong molded plug is standard; Additional length cord available: 25' and 50'
  
• Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  
• Performance certified tested at our facility for proper output and leaks before shipment
  
• Best 3-Year limited warranty in the marketplace
  
• Comes complete, just open the box, remove and install
  
• Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
  Manufacturer : Ice Eater by Power House
  Manufacturer Part No : P750-100-115V
  UPC : 652443000125

Ice Eater P750 - 3/4 HP

Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Features:

3/4 HP energy-efficient high quality motor with 36lbs thrust

230V, 2.35 amps, 1-phase, 50/60 Hz

Environmentally friendly lubricant

Patented Venturi Design for maximum thrust

Weight: 45lbs

Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.

Specifications:

• Horsepower: 3/4 HP
  
• Power needed: 230V, 2.5 amps, 1-phase, 50/60 Hz
  
• Typical Thrust: 36lbs thrust
  
• De-Ices Diameter of: Approx. 60'
  
• Uses: De-icing mid-sized boats and docks

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P750-100-230V
UPC : 652443000156

3/4HP Ice Eater with 25' Cord - 115V

Features:

• 3/4HP energy efficient high quality motor with 36 pounds thrust
  
• 4.7 Amps, 115V, 1 phase, 60/50 cycle
  
• 25' quick change power cord
  
• 2 - 25' x 3/8 hollow braided mooring lines with shackles
  
• Dimensions of shipping box 14-1/2 x 14-1/2 x 16-1/8
  
• Weight 45 lbs
  
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  
• Motor shaft is 316 stainless steel, the best material for salt water application
  
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  
• Stator motor windings have double impregnation of baked insulating varnish
  
• 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  
• Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  
• 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  
• Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  
• Performance certified tested at our facility for proper output and leaks before shipment
  
• Best three-year limited warranty in the marketplace
  
• Comes complete, just open the box, remove and install
  
• Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P750-25-115V
UPC : 652443000101

Ice Eater P750 - 3/4 HP

Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Features:

3/4 HP energy-efficient high quality motor with 36lbs thrust

115V, 4.7amps, 1-phase, 50/60 Hz

Environmentally friendly lubricant

Patented Venturi Design for maximum thrust

Weight: 45lbs

Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.

Specifications:

• Horsepower: 3/4 HP
  
• Power needed: 115V, 4.7amps, 1-phase, 50/60 Hz
  
• Typical Thrust: 36lbs thrust
  
• De-Ices Diameter of: Approx. 60'
  
• Uses: De-icing mid-sized boats and docks

Manufacturer : Ice Eater by Power House
Manufacturer Part No : P750-50-115V
UPC : 652443000118

Aluminum Anode - 1/2" Diamater - Fits All Models

Features:

• Recommended for use in salt water
• Sacrificial Aluminum Alloy Anode to protect against electrolysis
• Allen Wrench is included
• One size fits all The Power House, Inc.’s Ice Eater shafts

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 24901
UPC : 652443301314

Brackets for F250, F500, P250 & P500 - Set of 4

Ice Eater brackets specifically made for Ice Eater's F250, F500, P250 and P500.  Brackets come in a set of 4.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 20100
UPC : 652443200396

Brackets for F750DP, F1000DP, P750 & P1000 - Set of 4

Ice Eater brackets specifically made for Ice Eater's F750DP, F1000DP, P750 and P1000.  Brackets come in a set of 4. 

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 20200
UPC : 652443200402

P1101 Timer - 2 On/Off Settings Per Day w/2 Set Trippers -120V - 60Hz

Features:

• Intermatic 120V
• 24-hour repeating
• 2 ON/OFF settings per day
• 2 sets of trippers

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 26100
UPC : 652443002037

Replacement Power Cord - 100"

Ice Eater by The Power House 100' Replacement Power cord for use with Ice Eater units.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 163100
UPC : 652443000941

Replacement Power Cord - 150'

Ice Eater by The Power House 150' Replacement Power cord for use with Ice Eater units.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 143150
UPC : 652443001818

Replacement Power Cord - 25'

Ice Eater by The Power House 25' Replacement Power cord for use with Ice Eater units.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 163025
UPC : 652443000927

Replacement Power Cord - 50'

Ice Eater by The Power House 50'' Replacement Power cord for use with Ice Eater units.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 163050
UPC : 652443000934

Replacement Propeller for All Models Except 1/4HP

Ice Eater's Replacement Propeller for all models except the 1/4HP.

Manufacturer : Ice Eater by Power House
Manufacturer Part No : 20005
UPC : 652443002198