A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.
25mm (0.98") cleats have an extruded aluminium base, nylon moulded cleat and screw type lock Manufacturer : Barton Marine Manufacturer Part No : 51 253 UPC : 5035088512539
Manufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. Manufacturer : Barton Marine Manufacturer Part No : 60 451 UPC : 5035088604517
Max Rope Diameter:Up 12mm(0.47") Fastening: 6mm x 6 (0.24" x 6) SWL:550kg (1,212.54lbs)
The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.
The true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.
A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).
The clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.
The D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. Manufacturer : Barton Marine Manufacturer Part No : 81 502 UPC : 5035088815029
Barton Marine Drain Plug - 15mm (.60") Bore - White
This screw-type drain bung and socket is still among the best available. Supplied with rubber ‘O’ ring for a watertight seal. Manufacturer : Barton Marine Manufacturer Part No : 42 356 UPC : 5035088423569
The Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodising for a long-lasting finish.
It accepts up to four double tang blocks mounted on individual stainless steel swivel posts, but with just three deck fixing points.
The unit is fitted close to the mast base to accept halyards, reefing lines and topping lift and is designed to work in conjunction with our range of deck organisers, rope clutches and winches, doing away with the need to leave the cockpit when reefing, hoisting or lowering the mainsail.
Safe Working Load:1,540kg
'Spectro' anodised aluminium base
Four stainless steel swivel posts with nylon base washers
Four pairs of nylon packing washers for tang blocks
Used in conjunction with series 1-4 01 090 to 04 090 single blocks
Manufacturer : Barton Marine Manufacturer Part No : 81 550 UPC : 5035088815500
Barton Marine Series 0 Single Fixed Eye Block - 20mm