WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Product : MARINCO H3 HALOGEN REPLACEMNT BULB FOR SPL SPOT LIGHT 12V Manufacturer : Marinco Manufacturer Part No : 202319 Product : MARINCO H3 HALOGEN REPLACEMNT BULB FOR SPL SPOT LIGHT 12V
Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.
PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line)
GRND: Negative 10-30 VDC POCO supply power
ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco)
1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable)
1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable)
LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light)
POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC
CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal.
STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected
Manufacturer : Lumitec Manufacturer Part No : 101699 UPC : 089300016997
RIGID Industries Adapt XE & XP Magnetic Reed Switch Power Clip
The custom 70"/1.77M wiring harness is specifically designed to connect RIGIDs Adapt XE LED light and switch to your bike's electrical system.
It features battery terminals on one end and bullet connectors on the other to connect the light to the custom 3 position switch. Also included is a blue wire with an insulated butt connector to power the light and switch and an in-line 15A fuse holder.
Adapt XE Wire Harness Adapt XE Custom Harness For Adapt XE Moto Light 70 Inches/1.77 Meters Long Battery Terminal Connections/Bullet Connectors Includes Insulated Butt Connector and In-Line 15A Fuse
Custom 70 Inch/1.77-meter wiring harness
Specifically designed to connect RIGIDs Adapt XE LED light and switch to your bikes electrical system
Features battery terminals on one end and bullet connectors on the other
Connect the light to the custom 3 position switch
Also included is a blue wire with an insulated butt connector to power the light and switch
RIGID light covers add style and function to any bike. Protect your investment with an easy to snap on light cover made from durable polycarbonate plastic. Adapt XE covers are available in clear or amber and are perfect for areas that require covers on accessory lighting and add a unique look and an extra layer of protection for your RIGID Adapt XE LED light.
Adapt XE Amber Light Cover Adapt XE Easy To Snap On and Off Made of Durable Polycarbonate Plastic Adds an Extra Layer of Protection, Style, or Function To Any Bike
Add style and function to any bike
Protect your investment with an easy to snap on light cover
Made from durable polycarbonate plastic
Perfect for areas that require covers on accessory lighting
Unique look and an extra layer of protection for your RIGID Adapt XE LED light
This RIGID switch is a custom switch for the Adapt XE dirt bike LED light and features 3 settings: on, off, and Adapt modes. It is designed to easily mount to the handlebars and allows the Adapt XE LED light to run in either on mode or GPS-driven Adapt mode.
Adapt XE 3-Position Switch Adapt XE Custom Switch For Adapt XE Moto Light 3 Settings: On, Off, and Adapt Mode
Custom switch for the Adapt XE dirt bike LED light
Features 3 settings: on, off, and Adapt modes
Designed to easily mount to the handlebars
Allows the Adapt XE LED light to run in either on mode or GPS driven Adapt mode
Adapt XE 3-Position Switch Adapt XE Custom Switch
For Adapt XE Moto Light
3 Settings: On, Off and Adapt Mode
Product : RIGID INDUSTRIES ADAPT XE 3 POSITION SWITCH Manufacturer : RIGID Industries Manufacturer Part No : 300429 Product : RIGID INDUSTRIES ADAPT XE 3 POSITION SWITCH
Simply toggle power to set color and brightness and to select multiple fade modes.
The Shadow-Caster® single-zone lighting controller is a low-cost, marine-grade RGBW LED controller that can be operated from a standard switch. Simply toggle power to set color and brightness. The SCM-SNLC also has a built-in Shadow-NET® interface that allows the controller to synchronize color and lighting control with other Shadow-NET® devices. This enables a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.
The SCM-SNLC control also has a built-in ShadowNET® interface that allows the controller to synchronize color and lighting with other ShadowNET® devices. This provides a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.
Shadow-NET® is a multi-channel communications platform created by Shadow-Caster® to allow seamless integration and control of all of your boat’s lighting.
For use with fishing boats, pontoon boats, sports boats, and yachts.
Selectable RGB or RGBW output to support an optional white channel
Color-coded connections make for easy installation
Integrated Shadow-NET® interface broadcasts lighting commands to synchronize other Shadow-NET® enabled lighting products such as underwater lights and downlights
This device can be added to an existing Shadow-NET® network as an additional RGBW zone
Control brightness, color, and select multiple fade modes • Compatible with RGBW strips from other manufacturers
Internal RGBW backlight to indicate current color and mode
Exclusive power control technology to mitigate effects of electrical noise
Custom software versions available for boat builder applications
5.2” (132mm) x 2” (51mm) x 2.75” (70mm)
IP65 washdown rated enclosure
10-30 volts input range
Power: Support for 250W of RGBW lighting, 20 amps
ATC fuse for protecting the output
Quick start guide
Standard 2-year warranty
Manufacturer : Shadow-Caster LED Lighting Manufacturer Part No : SCM-SNLC UPC : 855726005835
Innovative Lighting LED Vertical Sidelights Stainless Steel Pair