AT-3 Small White Nylon Tie Mount - Qty. 500

The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Manufacturer : Weld Mount
Manufacturer Part No : 803500

120V Two Setting Heat Gun

Features:

• Two settings - Low: 572°F, 10 CFM & High: 1,000°F, 17 CFM
  
• 6.5' cord, 120V AC
  
• Great for heat shrink tubing and connectors, stripping paint and more
  
• Lightweight, under two pounds
  
• Stands on end for hands free operation
  
• Includes three nozzles and carrying case

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Ancor
Manufacturer Part No : 703023
UPC : 091887988482

Mini Clamp Multimeter

• Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals
  
• Auto range simplifies operation: 0.01-400 Amps, 0.001-600 Volts
  
• Auto power-off selection - power turns off automatically after 10 minutes of non-use
  
• True RMS - required for accurate measurement of inverter output
  
• Large digital display makes reading measurements easy
  
• Data hold - press "HOLD" button during measurement to lock reading value
• Test leads included with meter
  

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Blue Sea Systems
Manufacturer Part No : 8110
UPC : 632085081102

Pro Torch

The Pro Torch provides up to 90 minutes of run time on each filling.

Features:

• Flame temperature up to 1300°C (2500°F)
  
• Adjustable air flow control valve
  
• Compact size with ergonomic grip
  
• Includes removable base for added flexibility

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Ancor
Manufacturer Part No : 703060
UPC : 091887983395

Heavy-Duty Wire & Cable Cutter

This heavy duty cable cutter has steel forged blades that easily cut up to 350MCM (2 sizes larger than 4/0 AWG) copper wire and cable.

Features:

• Strong fiberglass handles with thermoplastic rubber grips for comfort and slip resistance
  
• Length: 17.5" (444mm)
  
• Weight: 2.9lb (1.3kg)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Ancor
Manufacturer Part No : 703006
UPC : 091887983418

Canvas Snap Tool 

Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Sea-Dog
Manufacturer Part No : 299190-1
UPC : 035514299671

Add-A-Snap - White - 4" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

Manufacturer : Sea-Dog
Manufacturer Part No : 299204W-1
UPC : 035514299626

Automatic Stripper and Crimper for 10-26 AWG

Features:

• Strips 26 to 10 AWG stranded wire
  
• Automatic jaw-load wire stripper self-adjusts to strip wire.
  
• Crimps 22-10 AWG insulated terminals.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Ancor
Manufacturer Part No : 702033
UPC : 091887965834

Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only

The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.
Manufacturer : Weld Mount
Manufacturer Part No : 80301

Motor Flush Ear Muff 

Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups and other maintenance that requires running an outboard engine out of the water.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Sea-Dog
Manufacturer Part No : 521500-1
UPC : 035514521017

NAVDoctor NMEA Network Diagnostic Tool

NMEA 2000 networks are used extensively for interfacing marine electronic products. It’s based on a robust Canbusarchitecture, but one bad device, cable or termination can have a detrimental effect on performance. Fault finding can be time consuming and tricky.

NAVDoctoris a portable NMEA 2000 network diagnostic tool/tester which quickly allows you to check and diagnose the NMEA 2000 network. It combines the functionality of existing NMEA 2000 display programs and test equipment into a single, cost effective, simple plug ‘n play box.

It’s self powered from the network and creates a local wifipoint for a mobile phone, tablet or PC to connect. Once connected, you simply access functions through a web browser so there’s no complicated software to install.

NAVDoctoris an essential tool for every marine electronics technician or installer and alsooffers the capability of printing a network health check certificate to validate an installation and improve customer service.

Features:

• No special Apps or software required –built-in web interface
• Works on any mobile device; iOS, Android, Windows, Mac, etc
• Connect wirelessly and view data through a web browser
• Lists all devices on the network
• Displays all PGNs on the network
• Drill down into a particular PGN and decode/display its data
• Display and log the RAW NMEA 2000 data
• Check the network health, voltages, bus load, error frames, etc.

Manufacturer : Digital Yacht
Manufacturer Part No : ZDIGNAVDOC
UPC : 703791696192

Replacement Blade for Rope Cutter

Ideal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines and strapping. Comes with a generous 4 foot cord. Operates on 120V AC power.

Manufacturer : Panther Products
Manufacturer Part No : 75-7061
UPC : 836125000461

Executive Adhesive & Fastener Kit w/AT-8040 Adhesive

This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.

The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.

The AT-1001003 Kit Contains:

• (1) AT-8040 - No Slide Multi Bonder Acrylic Adhesive
  
• (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
  
• (100) AT-5 - Large White Cable Tie Mount
  
• (50) AT-3 - Small White Cable Tie Mount
  
• (4) AT-113 - Large Footman's Strap
  
• (10) PS62-832-16SS - 1.00" Long Panel Stud
  
• (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
  
• (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
  
• (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
  
• (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
  
• (1) Plano Storage Box 14" x 9" x 2.75"
  
• Step By Step Instructions

Manufacturer : Weld Mount
Manufacturer Part No : 1001003

Executive Fastener Kit - No Adhesive

This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive

The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.

The AT-1001008 Kit Contains:

• (1) AT-300 - Dispensing Gun
  
• (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
  
• (100) AT-5 - Large White Cable Tie Mount
  
• (50) AT-3 - Small White Cable Tie Mount
  
• (4) AT-113 - Large Footman's Strap
  
• (10) PS62-832-16SS - 1.00" Long Panel Stud
  
• (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
  
• (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
  
• (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
  
• (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
  
• (1) Plano Storage Box 14" x 9" x 2.75"
  
• Step By Step Instructions

Manufacturer : Weld Mount
Manufacturer Part No : 1001008

DGC533 DEWALT® 33 Pocket USB Charging Tool Backpack - No LED Light

• USB charging battery dock simultaneously charges 2 devices via USB ports
  
• Maximum 2 Amps shared output
  
• 3 Internal charging wall pockets can hold a tablet, phone, and/or camera and can charge 2 devices through a USB connection to a 20V MAX* Lithium battery pack
  
• Low battery cut-off protection monitors battery voltage to avoid battery over-depletion
  
• Multiple interior panels hold a multitude of tools and accessories like drills, extension cords, pliers, screwdrivers, wrench sets, drill bits, testers and much more
  
• 31 Multi-use pockets inside and 2 outside help organize a wide variety of hand tools
  
• Padded web carrying handles and adjustable shoulder straps make carrying more comfortable, and convenient
  
• Large pads on back for extra comfort makes carrying heavier loads more comfortable on stress areas of the back
  
• Easy double-pull, heavy-duty zipper
  
• Base pad feet helps reduce wear and abrasion. *Maximum initial battery voltage (measured without a workload) is 20 volts
  
• Nominal voltage is 18

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : CLC Work Gear
Manufacturer Part No : DGC533
UPC : 084298925337

DGCL33 DEWALT® 33 Pocket Lighted USB Charging Tool Backpack

• USB charging battery dock simultaneously charges 2 devices via USB ports
  
• Maximum 2 Amps shared output
  
• 3 Internal charging wall pockets can hold a tablet, phone, and/or camera and can charge 2 devices through a USB connection to a 20V MAX* Lithium battery pack
  
• Low battery cut-off protection monitors battery voltage to avoid battery over-depletion
  
• Integrated 2-level LED light system allows adjustment for wide area illumination or close-up work
  
• Multiple interior panels hold a multitude of tools and accessories like drills, extension cords, pliers, screwdrivers, wrench sets, drill bits, testers and much more
  
• 31 Multi-use pockets inside and 2 outside help organize a wide variety of hand tools
  
• Padded web carrying handles and adjustable shoulder straps make carrying more comfortable, and convenient
  
• Large pads on back for extra comfort makes carrying heavier loads more comfortable on stress areas of the back
  
• Easy double-pull, heavy-duty zipper
  
• Base pad feet helps reduce wear and abrasion
  
• *Maximum initial battery voltage (measured without a workload) is 20 volts
  
• Nominal voltage is 18

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : CLC Work Gear
Manufacturer Part No : DGCL33
UPC : 084298923333

Add-A-Snap - Black - 4" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer : Sea-Dog
Manufacturer Part No : 299204B-01
UPC : 035514299688

AT-880 PolyBonder Adhesive - Single

Weld Mount AT-880 is designed to bond plastics, metals, and rubbers; which have been challenging to bond to, in the past.  AT-880 excels at bonding materials like HDPE, such as King Starboard ™.  You'll also find it as a great solution to bonding to things like polypropylene plastic.  So if you want to mount something on your kayak, you don't have to drill holes.

Features:

• Bonds Polypropylene to itself with minimal Surface Prep. Alcohol Wipe only
• Bond All Weld Mount Parts
• Easy to Use
• Convenient 50ML, 10:1, System B Non-Plugging Cartridge
• 3 Minute Open Time/24 Hour Cure

Bonds To:

• PPE
• Aluminum
• Carbon Steel
• Stainless
• Polycarbonate
• HDPE
• FRP

Manufacturer : Weld Mount
Manufacturer Part No : AT-880

Hand Held DC System Tester

• At-a-glance testing of batteries, on-board charger, alternator / regulator output
  
• 6 Easy to read LED Indicators
  
• Compact lightweight design

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Manufacturer : ProMariner
Manufacturer Part No : 87710
UPC : 031669877108